全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
在機器大清洗后，安裝調節螺母時切勿太緊，該調節螺母具有越轉越緊功能，太緊會導致刀片之間壓力過緊，從而是機器不能正常運轉。
When the machine is cleaned, it is not too tight when installing the adjusting nut. The adjustment nut has the function of tighter and tighter. Too tight will result in the pressure between the blades too tight, but the machine can not operate normally.
所切的鮮肉不能為凍肉及含有骨頭的肉，以免損壞刀組。
The fresh meat can not be frozen meat and bone containing meat, so as not to damage the knife set.
鮮肉切絲切片機切肉長度不限，其寬度，厚度，切片切絲厚度
The cut length of fresh meat chopper is not limited, its width, thickness, slice thickness
sl-92 ≤145mm ≤40mm ≤5.0mm
Sl-92 < < 145mm > 40mm < 5.0mm
當機器切的肉片出現表面出現粗糙是，效率低時，應檢查切片刀的刀刃是否完好，如有缺口時，應及時更換刀組，或進行調整乃更換。更換時要小心刀刃勿造成不必要的傷害。
When the surface of the cutting machine is rough and the efficiency is low, it is necessary to check the blade of the slicer to be perfect. If there is a gap, the knife group should be replaced in time, or the adjustment and replacement should be made. Be careful not to cause unnecessary injury when replacing.
當機器在工作中被過大鮮肉卡住時，應及時盡快的按急停開關，以免電機過熱而燒毀機器。
When the machine is jammed too large during the work, the emergency stop should be pressed as soon as possible, so as to prevent the motor from overheating and burn the machine.
機器在啟動后需運行1-2分鐘，觀察是否有異?，F(xiàn)象(如雜音，氣味，刀組運轉等，并查看是否有配件過于松動)，帶正常運轉后，方可從進料口進料。
The machine needs to run for 1-2 minutes after starting, to observe whether there are abnormal phenomena (such as noise, smell, knife operation, etc., and see if the parts are too loose). After the operation, the material can be entered from the inlet.
鮮肉切絲機為了保證更好地切絲效果，放肉時盡量在料口中間放入。機器使用完畢應將電源解除，切勿長期帶電，機器應放置于干凈，通風處，不易造成電器受潮，以預防觸電事故發生。
In order to ensure better shredding effect, the fresh meat shredder should be placed in the middle of the feed as far as possible. When the machine is used, the power supply should be lifted, and the electric power should not be charged for a long time. The machine should be placed in a clean and ventilated place, which is not easy to cause the electricity to be dampened, in order to prevent the accident from electric shock.
本文由切絲切片機友情奉獻.更多有關的知識請點擊:http://jonathasdeandrade.com我們將用更的技術.更真誠的態度.為您提供更為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article from the cut silk slicing machine friendship dedication. More related knowledge please click: http://jonathasdeandrade.com we will use the most advanced technology. The most sincere attitude. To provide you with the most comprehensive service. More related knowledge we will continue to dedicate to you. Please look forward to.