歡迎光臨濟南宏泰食品機械有限公司網站!

全國咨詢熱線
洗菜機的使用方法
發布時間:2018-06-14 來源:http://jonathasdeandrade.com 發布人:admin

1、打開洗菜機箱閥門,在洗菜機入水口處接入水,水量以被清洗的菜可完全沒入為主。但一般情況下要將水加滿水位線,即溢水口。
1, open the washing machine box valve, access the water at the inlet of the vegetable washing machine, and the amount of water to be washed can be completely excluded. But in general, the water should be filled to the water level, that is, the overflow.
2、將電源接入380V電壓,閉合斷路開關。打開“輸送帶啟動”開關,檢查輸送帶是否反轉(以輸送帶向上運動為正)。若輸送帶反轉,則改變電源接入方式。
2, connect the power to 380V voltage and close the circuit breaker. Turn on the "belt start" switch to check if the conveyor belt is reversed (the upward movement of the conveyor belt is positive). If the conveyor belt is reversed, the power supply access mode will be changed.


3、打開“洗菜啟動”開關,此時氣泵也同時開啟進行鼓泡。檢查蔬菜被清洗的情況并調節氣體閥門控制氣量大小,達到適合的鼓泡速度。
3, open the "washing dish start" switch, at this time, the air pump is also open to bubble. Check the situation of vegetables being cleaned and adjust the gas valve volume to achieve the appropriate bubbling speed.
4、當循環水水箱水滿時,可打開“循環水啟動”按鈕。此時循環水系統對菜進行沖浪清洗。
4. When the circulating water tank is full, the "circulation water start" button can be opened. At this time the circulating water system washed the dishes by surfing.
5、循環水系統打開后,被清洗的菜將大量向輸送帶運動,此時可打開噴淋系統閥門,進行噴淋清洗,而水則由輸送帶網格滲下參與水循環。
5. After the circulating water system is opened, the washed dishes will move to the conveyor belt. At this time, the sprinkler system can be opened and sprinkled, while the water is permeated by the conveyer belt grid to participate in the water cycle.
您如果對我們的產品感興趣或者有任何的疑問,您可以直接給我們留言或直接與我們聯絡,我們將在收到您的信息后,會時間及時與您聯絡。
If you are interested in our products or have any questions, you can leave a message directly to us or contact us directly. We will contact you in time for the first time after receiving your information.

上一篇:食品切片機的使用方法
下一篇:土豆切塊機的操作使用方法

相關新聞