全國咨詢熱線
切片機的作業原理也非常的簡單，是利用冷卻的滾筒對會冷凝結晶的物料進行結片，再經過鋒利的刀片刮片，然后把片按照相應的大小來進行鏟出，這樣可以很好的來進行生產或者是進行相應的活動。
The operation principle of the slicer is also very simple. It is to use the cooled drum to flake the materials that will condense and crystallize, then scrape them with a sharp blade, and then Shovel them out according to the corresponding size. In this way, it can be well used for production or corresponding activities.
切片機在我們生活中的應用是非常多的，而它的種類也有很多，冷凝結晶也是有切片機的，用的是轉鼓式的切片機。這個切片機主要是由滾筒、機架、刀片、傳動部分、機殼等一些組成的，利用滾筒運轉，起到一個飛輪的作用，然后通過刀片鏟出不規則片，可以快速的進行切片了。
Slicers are widely used in our life, and there are many kinds of slicers. Condensing crystallization also has slicers, which use drum slicers. This slicer is mainly composed of drum, frame, blade, transmission part, casing, etc. it uses the drum to operate and play the role of a flywheel, and then shovel irregular pieces through the blade to slice quickly.
要說切片機配套的刀片，還是要是具體切的是什么物質，因為不同的物質所對應的刀片和切片機都是不一樣的。刀片材質有：銅、不銹鋼、錳鋼、四氟乙烯、膠木、鋼帶，針對不同物質的硬度和化學特性來選擇各種適合自己的刀片。
To say the blade matched with the slicer, or what material is cut, because the blade corresponding to different substances is different from the slicer. Blade materials include: copper, stainless steel, manganese steel, tetrafluoroethylene, bakelite and steel strip. Various blades suitable for yourself are selected according to the hardness and chemical characteristics of different substances.
切片機的外包裝是不銹鋼的，所以我們在日常使用的時候，應當特別注意不要使用過尖或者是過硬的東西碰到其表面，以免劃傷。如果在使用一段時間之后，需要對切片機產品進行清洗的時候，工作人員應當同時卸上下的固定的螺絲，以免在拆掉一個螺絲的時候，發生危險，或者是損壞設備。
The outer package of the slicer is stainless steel, so we should pay special attention not to use too sharp or hard things to touch its surface in order to avoid scratching. If it is necessary to clean the slicer products after a period of use, the staff should remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.
還要注意對切片機做好潤滑護理，應當定期查看其的潤滑情況，在添加潤滑油的時候，應當保證油量充足，但不要過量。工作人員應當在每天的工作結束之后，及時將切片機內部是所有殘留物料清理干凈。并且要注意檢查刀片的磨損情況，如果有問題的話，應及時修復或者是更換。另外，是將工作現場清理干凈，而且要注意切斷設備的總電源。
Also pay attention to the lubrication care of the slicer. Check its lubrication regularly. When adding lubricating oil, ensure that the amount of oil is sufficient, but not excessive. The staff shall clean up all residual materials inside the slicer in time after the end of each day's work. And pay attention to check the wear of the blade. If there is a problem, it should be repaired or replaced in time. In addition, clean the work site and pay attention to cutting off the total power supply of the equipment.
