全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
在食物職業咱們是常常會運用到肉類的切丁機，切丁機能夠幫助咱們將食物切碎混合，省掉了許多時刻。
In the food profession, we often use the meat dicing machine, which can help us to chop and mix food, and save a lot of time.
所以大多數食物加工職業都會有切丁機，不過切丁機在運用一段時刻之后是要進行清洗的，不然的話里邊的食物殘留物是會散發出許多的異味的。
So most food processing professions will have a dicing machine, but the dicing machine is to be cleaned after a period of time, otherwise the food residues inside will emit a lot of odor.
切丁機滾筒內應該如何清洗：
How to clean the drum of the dicing machine?
1、往切丁機滾筒內注入一定量的水。用水將其中的廢屑排出。
1. Inject a certain amount of water into the drum of the dicing machine. The waste is discharged with water.
2、調入一定量的洗滌劑或許是劑在水里邊然后參加滾筒內，將桶滾動清洗。
2. Input a certain amount of detergent may be disinfectant in the water and then participate in the drum, the drum rolling cleaning.
3、上述清洗作業完畢后，再用高壓水槍清洗切丁機滾筒內，并且簡略滾動滾筒，使泄水孔朝下，排盡滾筒內的水。
3. After the above cleaning operation is completed, the drum of the dicing machine is cleaned with a high-pressure water gun, and the drum is simply rolled so that the discharge hole is downward and the water in the drum is exhausted.
現在大多數切丁機生產廠家都會在設備上設備死角清洗設備，經過該設備能夠輕易的把切丁機滾筒內清洗潔凈。
At present, most of the manufacturers of dicing machines will clean the dead-angle equipment on the equipment, which can easily clean the drum of the dicing machine.
切丁機外表應該如何清洗：
How should the appearance of the dicing machine be cleaned?
1、能夠用堿性物質的清洗液，堿液濃度2%左，加熱到60-70度，油脂和堿液在高溫下發生皂化反響，能夠很完全的清洗掉殘留在切丁機外表的油脂。
1. Can use alkaline cleaning solution, alkali concentration of 2% left, heated to 60-70 degrees, oil and alkali saponification reaction occurs at high temperature, can completely clean the remaining oil on the surface of the dicing machine.
2、用軟布或許軟刷子沾有兌著洗滌劑的水擦拭，然后用清水沖刷潔凈。（清洗過程防止用水直接噴沖軸承座，電腦控制箱控制面板）
2. Wipe with soft cloth or brush with water mixed with detergent, then wash with clean water. (Cleaning process to prevent water direct spray bearing seat, computer control box control panel)
大家在清洗切丁機時一定要仔細，切丁機要定期進行一次清理，這樣才不會影響切丁機的運用作用。
Everyone must be careful when cleaning the dicing machine. The dicing machine should be cleaned regularly so as not to affect the use of the dicing machine.
以上信息是我們切丁切塊機整理發布希望能幫助到大家，我們的網站是：http://jonathasdeandrade.com！
The above information is our dicing slicer sorting and publishing hope to help you, our website is: http://jonathasdeandrade.com!