全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
一、切片機使用注意事項
First, the use of attention for the slicer
切片機是切制薄而均勻組織片的機械，組織用堅硬的石蠟或其他物質支持，每切一次借切片厚度器自動向前(向刀的方向)推進所需距離，厚度器的梯度通常為1微米。切制石蠟包埋的組織時，由于與前一張切片的蠟邊粘著，而制成多張切片的切片條。
The slicing machine is a machine for cutting thin and uniform tissue slices. The tissue is supported by hard paraffin or other substances. Each time it cuts the distance needed by the slicing gauge automatically (to the direction of the knife), the gradient of the thickness gauge is usually 1 microns. During the cutting of paraffin embedded tissue, a number of slices were made from the wax edge of the previous slice.
1、可利用控制面板上的“鍵盤鎖按鈕”將鍵盤鎖定。
1, you can use the keyboard lock button on the control panel to lock the keyboard.
2、停機時，應將玻璃窗打開，待機器完全干燥后再開機。
2. When the machine is shut down, the glass window should be opened to open the machine after the machine is completely dry.
3、嚴禁隨意關閉箱體壓縮機，否則會嚴重影響你的工作。
3, strictly prohibit the closure of the box compressor, otherwise it will seriously affect your work.
二、切片機操作規程
Two. Safety operation rules of slicer
1、電源：保正開關完整無損。工作前開機：連接電源→打開設備電源總開關→設備電源起動開關。工作后關機：?jiǎn)?dòng)設備剎車片→關閉設備電源開關→斷開外電源連接。
1, power supply: the positive switch is completely undamaged. To open the machine before work: connect the power supply, open the total switch of the equipment power supply and the power starting switch of the equipment. After work, turn off the machine: start the equipment brake pad, switch off the power switch of the equipment and break off the external power connection.
2、禁止隨意亂接亂拉電線，開關插座必須上墻。在進行設備清潔或打掃衛生時，防止水濺到電源上。
2, the prohibition of random disorderly pull wire, switch socket must be on the wall. Prevent water from splashing into the power supply when equipment is cleaned or cleaned.
3、禁止非工作人員擅自進入工作區。
3, non staff members are prohibited from entering the working area without authorization.
4、切片機工作時，如遇到緊急情況應立即關閉緊急剎車開關。
4, when the slicer is working, emergency brake switch should be shut down immediately if an emergency is encountered.
本文的精彩內容來自切絲切片機詳細內容請點擊我們的網站: http://jonathasdeandrade.com 謝謝您的到來!
The wonderful content of this article comes from the detailed content of the cutting machine, please click on our official website: http://jonathasdeandrade.com thank you for coming!