歡迎光臨濟南宏泰食品機械有限公司網站!

全國咨詢熱線
切絲機怎么清理污漬?
發布時間:2022-05-19 來源:http://jonathasdeandrade.com 發布人:admin

切絲機用的時間久了,難免會產生一些污漬,污漬如果長時間不清洗,可能會影響設備的使用效率以及食材的衛生,如何去除切絲機上的污漬呢?跟隨小編一起來看看吧!
If the silk cutter is used for a long time, it will inevitably produce some stains. If the stains are not cleaned for a long time, it may affect the use efficiency of the equipment and the hygiene of food materials. How to remove the stains on the silk cutter? Follow Xiaobian to have a look!
1、,可以在切絲機附帶的滾筒里添加適量的清水,這樣有利于將其中的雜質排出;然后,可以使用一些軟布或者是軟刷子,并使用沾有兌著洗滌劑的水進行擦拭,擦拭完成之后,在用清水進行沖洗一次。
1. First of all, an appropriate amount of clean water can be added to the drum attached to the wire cutter, which is conducive to the discharge of impurities; Then, you can use some soft cloth or soft brush and wipe it with water mixed with detergent. After wiping, rinse it with clean water.
2、等上面的清理工作完成后,先準備好適量的清水,然后加入一定量的洗滌劑或者是消*劑加入切絲機的桶內,并使桶轉動進行清洗;清洗結束后,再用高壓水槍清洗桶內,并且簡單轉動桶,使泄水孔朝下,直到桶內的水完全排出。
2. After the above cleaning work is completed, first prepare an appropriate amount of clean water, then add a certain amount of detergent or disinfectant into the barrel of the wire cutting machine, and rotate the barrel for cleaning; After cleaning, clean the bucket with a high-pressure water gun, and simply rotate the bucket to make the drain hole face down until the water in the bucket is completely discharged.
3、不過,在清洗的過程中,還需要注意一些問題,比如不可以直接將水噴在切絲機的軸承座上面,以及電氣箱控制面板等都不可以接觸到水,否則可能會因為受到水的影響,而造成受損,出現銹蝕等其他問題,會影響到設備的使用情況。
3. However, in the process of cleaning, we need to pay attention to some problems. For example, we can't spray water directly on the bearing seat of the wire cutter, and the control panel of the electric box can't come into contact with water. Otherwise, it may be damaged and rusted due to the influence of water, which will affect the use of the equipment.
所以,要去除切絲機的污漬,它的清洗工作是很重要的,它上面的污漬也是需要去除的,這樣切絲機不僅可以提高使用效率,而且還可以延長它的使用壽命,增加了它的實用性,對設備的保養與維護是有益處的。
Therefore, to remove the stains of the wire cutter, its cleaning work is very important, and the stains on it also need to be removed. In this way, the wire cutter can not only improve the use efficiency, but also prolong its service life, increase its practicability, and is beneficial to the maintenance and maintenance of the equipment.


還有一些切絲機清潔的小竅門一起來看看吧~
There are also some tips for cleaning the shredder. Let's have a look~
1、清洗前須拔掉切絲機電源,嚴禁用水沖洗,只能用濕布清潔,然后用干布抹干。
1. Before cleaning, unplug the power supply of the wire cutter. It is strictly prohibited to wash with water. Only clean with a wet cloth, and then wipe dry with a dry cloth.
2、根據使用情況,約一星期的時間需把切絲機護刀板拆下清洗,用濕布清潔再用干布抹干。
2. According to the use situation, the cutter guard plate of the wire cutter needs to be removed and cleaned in about a week, cleaned with a wet cloth and then wiped dry with a dry cloth.
3、切肉出現厚薄不均勻或碎肉較多時則需要磨刀,磨刀時應先將刀片除去干凈,去除刀片上的污漬。
3. When the thickness of the cut meat is uneven or there are many pieces of meat, you need to sharpen the knife. When sharpening the knife, you should first remove the blade and remove the stains on the blade.
4、每天清潔完后,用紙箱或是木箱封閉切絲機。
4. After cleaning every day, close the shredder with cartons or wooden cases.
5、嚴禁用水直接沖洗設備,機器要可靠接地。
5. It is forbidden to wash the equipment directly with water, and the machine shall be reliably grounded.
本文的精彩內容由切絲切片機提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://jonathasdeandrade.com/我們有專門的客服為您解答問題
The wonderful contents of this article are provided by the slicer. There are many wonderful contents on this website. You can click to enter more contents: http://jonathasdeandrade.com/ We have special customer service to answer your questions

上一篇:切菜機切菜是否均勻和哪些因素有關?
下一篇:怎樣增加切菜機使用壽命?

相關新聞