果蔬清洗機之紅棗清洗機清洗流程
Cleaning Process of Jujube Cleaner for Fruit and Vegetable Cleaner大棗的服用具備很高的營養成分,大部分人都很喜愛吃,經常被做為煲湯的食物。但是你曉得嗎,紅棗在晾曬的過程中,沾了很多“渣滓”在棗子表皮的皺褶中,隨意用水洗洗又怎樣能把它洗潔凈?假設是少量的我們能夠采用人工屢次清洗,但若是大量的呢?這時用得用到紅棗清洗機來發威了,當然紅棗清洗機也可用于家用,那么它是如何清洗紅棗的呢?
Date has a high nutritional content. Most people like it very much. It is often used as food for soup. But do you know that in the process of drying, jujube is stained with a lot of "dregs" in the wrinkles of jujube epidermis. How can you wash jujube with water at will? Assuming a small amount, we can use manual repeated cleaning, but if a large number of it? At this time, the use of jujube washing machine to express prestige, of course, jujube washing machine can also be used for household use, so how does it clean jujube?
紅棗清洗機保鮮棗工藝流程:原料—選擇—清洗—吹干—選擇—提升—上油—分級,工作時由調速電機經過傳動局部帶動網帶向前保送,同時在鼓泡和后部射流推進器的共同作用下,使物料在水中翻騰振動從而到達清洗的目的。
The technological process of fresh-keeping jujube of jujube cleaning machine is as follows: raw material-selection-cleaning-blowing-drying-selection-lifting-oiling-grading. When working, the speed-regulating motor drives the mesh belt forward through the transmission part. At the same time, under the combined action of bubbling and rear jet propeller, the material can tumble and vibrate in water to achieve the purpose of cleaning.
紅棗清洗機的操作:
Operation of jujube cleaning machine:
1、清洗前的準備
1. Preparations before cleaning
1)檢查設備能否有緊固件的松動,皮帶能否完好、跑偏,網帶有無斷開、殘絲、跑偏,水泵、起泡機能否旋轉正常,噴淋能否暢通,電氣開關能否開關正常。
1) Check whether the equipment has loose fasteners, whether the belt is intact and deviated, whether the mesh belt is disconnected, residual wire, deviated, whether the pump and foaming machine rotate normally, whether the spray can be smoothly, whether the electrical switch can be normal.
2)將循環水箱、兩臺氣泡清洗機內注滿清水。并且將循環水箱上的過濾網裝置好。
2) Fill the circulating water tank and two bubble cleaners with clean water. And the filter screen device on the circulating water tank is set up well.
2、開機要領
2. Main Points of Start-up
1)啟動整條加工線時,要開啟飲料泵,依次為9,5,4號按鍵,中間要停頓一會在依次開啟,在一切的飲料泵開啟正常后,依次開啟氣泡清洗機,毛發去雜清洗機,然后再開啟振動布料提升機,調理適合的下料速度。
1) When starting the whole processing line, the first step is to turn on the beverage pump, which is button 9, 5 and 4 in turn. In the middle, stop and turn on in turn. After all the beverage pumps open normally, turn on the bubble cleaner, hair cleaner, and then turn on the vibrating cloth elevator to adjust the appropriate cutting speed.
2)消費中要經常以下幾處停止巡查:振動布料提升機下料能否平均,噴淋壓力能否缺乏,清水供給量能否充足。
2) Consumption should often stop patrolling in the following areas: whether the vibrating cloth hoist can average the discharge, whether the spray pressure can be lacking, whether the supply of clean water can be sufficient.
3、停機也是有考究的
3. Stopping is also exquisite.
在整個消費線停機前先依次關停振動布料提升機、一道洗的氣泡清洗機、毛發去雜清洗機、二道洗的氣泡清洗機、后關閉進水閥門。
Before shutting down the whole consumption line, the vibration cloth hoist, one-wash bubble cleaner, hair cleaning machine, two-wash bubble cleaner, and then the water inlet valve are shut down.
全部設備停機后,翻開排水閥排干設備里的水。其次清算氣泡清洗機里和毛發去雜清洗機毛刷上殘留的原料。然后用高壓清洗機,清洗氣泡清洗機缸腔,毛發去雜清洗機缸體以及循環水箱的濾網。后關閉設備的電源,并按急停鍵。
After all the equipment shuts down, first turn on the drain valve to drain the water in the equipment. Secondly, the residual raw materials in the air bubble cleaning machine and the hair cleaning machine brush are cleared. Then the cylinder cavity is cleaned by high-pressure cleaning machine, and the filter screen of the cylinder body and circulating water tank is cleaned by hair removal. After closing the power supply of the equipment, press the emergency stop key.
果蔬清洗機之紅棗清洗機清洗流程就講到這里了,大家想要了解更多的話請關注我們網站。
This is the end of the cleaning process of the jujube washing machine of fruit and vegetable cleaning machine. If you want to know more, please pay attention to our website.